Knife Gate Valve

The offered Knife Gate Valve is made available by us for use in the various commercial and industrial applications. The offered gate valves are often used when a straight-line flow of fluid and minimum restriction is needed. The offered gate valves were designed for specific use in the pulp and paper industry. This valve is used to cut through extremely thick fluids and dry bulk solids. The design of this valve makes it inherently self-cleaning, as the knife is cleared of abrasives with each stroke as it passes the seat rings and skirts. The Knife Gate Valve is very effective.

Technical specification of  Knife Gate Valve

Size	50 NB -600NB above 600NB consult factory
Pressure	150 PSI
temperature	0 deg C - 1200 deg C.
Body, Chest	Solid One piece casting of cast iron Fg260 Cast Steel Gr WCB, CF8, CF8M.
Seat	Integral to body, soft, optional
Gate	AISI SS 304, 316, 316L, 317, 316L
Screw Spindle	AISI SS 410, 304, 316
Nut	Brass
Yoke	Plate type of MS
Gland Follower	Cast Iron, Cast steel, Ductile Iron, CF8, CF8M
Hand Wheel	Cast Iron, Cast steel, Ductile Iron
Gland Packing	PTFE, PTFE Impergnated
Ends	Lugged
Port	Standard (Round)
	Optional V Port, Diamound Port.